Spokane Create! Forums

Check out the awesome aluminum forge we built last night,
Thanks for putting this project on John!

Nice guys! John, what a great idea! Thanks for organizing this build.

So much that can be done with it too.

Very Cool, So many cool projects to be made. do you plan on lost foam or green sand?

It you need a known raw Aluminum for projects A Local Spokane guy sells 356 Aluminum ingots on Ebay he is also on the Alloy avenue forums.

I am not affiliated with him. just passing on info. So I hope a link to his ebay is okay.
http://www.ebay.com/itm/171224296911?_tr...EBIDX%3AIT

If you want to try making some K-Bond Molding sand. http://www.foundry.ray-vin.com/k-bond/k-bond.htm

I have some of the hard to find Bentone 34 ( not much but good for a test batch ) I would be happy to donate. just let me know where to send it.




Been Planing a New Electric Furnace for this summer.. Using 2300 Firebrick and Sairset as motar from EJ Bartells and standard material from Home depot as the frame.

That is a great project. I work with some large gas forges and have been talking about making a small one for home. Where did you get the refractory cement? I have been planning on coming by on a Wednesday but have been busy the last few weeks.

(01-16-2015, 01:27 AM)Kyo Wrote: [ -> ]I have some of the hard to find Bentone 34 ( not much but good for a test batch ) I would be happy to donate. just let me know where to send it.

Awesome! Thanks. I will send you a PM with a mailing address.

No Problem. I shipped them out this morning, The package should arrive in a day or two.

(01-22-2015, 08:36 PM)Kyo Wrote: [ -> ]No Problem. I shipped them out this morning, The package should arrive in a day or two.

Thank you much! We will watch for them.

Got it!

Thanks KYO, looking forward to making some awesome castings.

(01-26-2015, 07:58 AM)Dan Wrote: [ -> ]Got it!

Thanks KYO, looking forward to making some awesome castings.

Nice,

No Problem I look forward to seeing what you guys make..