Please visit the homepage for location and information on open hours
Spokane Create! Forums › Spokane Create! › Projects v
Bed Leveling Probe = Epic Fail

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bed Leveling Probe = Epic Fail
07-26-2015, 09:04 AM,
#21
ctcollins9 Offline
Colby Collins
***
 		Posts: 87
Threads: 11
Joined: Jan 2015
Reputation: 1
RE: Bed Leveling Probe = Epic Fail
Dan, sorry I haven't printed them yet, it has been chaos as we are in the middle of moving out stuff to our new house that is 8 hours away, but I still have access to my printer and will try to get the parts printed soon.....

Again, thanks so much!
"If it isn't broke, fix it until it is"
Find
Reply
07-26-2015, 05:25 PM,
#22
ctcollins9 Offline
Colby Collins
***
 		Posts: 87
Threads: 11
Joined: Jan 2015
Reputation: 1
RE: Bed Leveling Probe = Epic Fail
Ok, I guess I had time to print the parts today! It seems to work amazing, but I will wait a little while to see how good it actually works.

Thanks so much Dan!

Here are a couple pictures: https://www.dropbox.com/sh/vn8kdukox95fz...eQwda?dl=0
"If it isn't broke, fix it until it is"
Find
Reply
08-23-2015, 05:02 PM, (This post was last modified: 08-28-2015, 10:42 AM by ctcollins9.)
#23
ctcollins9 Offline
Colby Collins
***
 		Posts: 87
Threads: 11
Joined: Jan 2015
Reputation: 1
RE: Bed Leveling Probe = Epic Fail
Dan, after I have been using the bed leveling system you modeled, I have found it works really really well. I would like to make one change to part 1, can you please make it 1.5mm thicker (total of 4.5mm thick) and for the holes on the edges that fit the bolts, can you please move them out about, say, 3mm on each side. Part 2 is perfect, BTW! I have really been missing SC lately, and there aren't any decent makerspaces near me Sad.

Sincerely, Colby!
"If it isn't broke, fix it until it is"
Find
Reply
09-03-2015, 12:45 PM, (This post was last modified: 09-03-2015, 12:46 PM by Dan.)
#24
Dan Offline
Administrator
*******
 		Posts: 198
Threads: 43
Joined: Jan 2013
Reputation: 1
RE: Bed Leveling Probe = Epic Fail
Yikes, time flies
Here you go! give it a go and let me know if I miss understood the directions.


Attached Files
.zip   Part 1-updated.zip (Size: 4.71 KB / Downloads: 1)
-Dan

"If you didn't build it, you will never own it." - Barton Dring
Find
Reply
09-03-2015, 01:59 PM, (This post was last modified: 09-04-2015, 08:34 AM by ctcollins9.)
#25
ctcollins9 Offline
Colby Collins
***
 		Posts: 87
Threads: 11
Joined: Jan 2015
Reputation: 1
RE: Bed Leveling Probe = Epic Fail
Thank you! I appreciate it a lot! I know you're probably busy!

Edit 9/4/15: I tested the part and it will work perfect. Thanks.
"If it isn't broke, fix it until it is"
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)