Please visit the homepage for location and information on open hours |
Thread Rating:
Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
|
06-15-2015, 09:16 AM,
|
|||
|
|||
Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
Hey, I fried my arduino again, . I dropped a wire on the board and it shorted the voltage regulator, so I was looking for a new board again, and I found these, they are authentic arduino mega 2560 boards. They're only $15.
http://www.ebay.com/itm/121675479672?_tr...EBIDX%3AIT |
|||
06-19-2015, 09:36 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!) | |||
07-06-2015, 04:34 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
Well, being 13 as I am, I do not have much knowledge about that.
|
|||
07-06-2015, 08:16 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
(07-06-2015, 04:34 PM)ctcollins9 Wrote: Well, being 13 as I am, I do not have much knowledge about that. 13, smart, and have access to the internet. Doesn't sound like there's anything stopping you. Actually, pretty sure the regulators on the Mega boards are SMD so that might be hard to solder, but probably doable. |
|||
07-06-2015, 09:13 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
Well, I have checked into that.........I don't have my soldering iron here at my nutty grandma's house. Still am looking for a place.
|
|||
07-06-2015, 09:21 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
I just ordered a handful of $4 Arduino Nanos from China with the non-FTDI serial chip. They would've been $1-$1.50 each, but I wanted the USB cable that came with them. I'll let you know how they compare. From what I found online, with the exception of a different driver they should work just fine. Depending on the project, it's hard to argue with $1 Nanos, $3 Unos, and $8 Megas.
|
|||
07-07-2015, 03:31 AM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
I have 2 Nanos that I ordered from China. Seems to work pretty well.
|
|||
07-07-2015, 08:00 PM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
(07-06-2015, 09:21 PM)ABearden Wrote: I just ordered a handful of $4 Arduino Nanos from China with the non-FTDI serial chip. They would've been $1-$1.50 each, but I wanted the USB cable that came with them. I'll let you know how they compare. From what I found online, with the exception of a different driver they should work just fine. Depending on the project, it's hard to argue with $1 Nanos, $3 Unos, and $8 Megas.Now that FTDI isn't bricking counterfeit chips...why not? j/k ;-)
-N8
"I built it because I didn't know I couldn't" |
|||
07-08-2015, 07:05 AM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!) | |||
07-08-2015, 10:08 AM,
|
|||
|
|||
RE: Really Cheap Authentic Arduino Mega 2560 R3 Boards ($15!)
Found this for $35. So I ordered one. http://www.ebay.com/itm/311297761963?_tr...EBIDX%3AIT
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread: 3 Guest(s)