Please visit the homepage for location and information on open hours |
Thread Rating:
ATmega & PIC Prototyping PCB
|
09-02-2015, 08:52 PM,
|
|||
|
|||
RE: ATmega & PIC Prototyping PCB
(09-02-2015, 08:18 PM)ABearden Wrote: That's awesome! Didn't get a change to look at them tonight, I'll have to look next week. Thanks Arthur! I'm just going to make sure all the pins connect where they should (99% sure, but would like to verify with a meter!) and I'll bring them in next week for sure! |
|||
01-13-2016, 08:18 AM,
|
|||
|
|||
RE: ATmega & PIC Prototyping PCB
I have built up some proto-PCBs with ATMega and Arduino bootloader. However, I have built some of these up with a 20Mhz resonator (25% faster than a "standard" Arduino)!
If you want to play with a 20Mhz Arduion, you'll need to add the following to your "boards.txt" in your Arduino folder. Code: ############################################################## |
|||
01-13-2016, 08:20 AM,
|
|||
|
|||
RE: ATmega & PIC Prototyping PCB
(01-13-2016, 08:18 AM)Brendan Wrote: I have built up some proto-PCBs with ATMega and Arduino bootloader. However, I have built some of these up with a 20Mhz resonator (25% faster than a "standard" Arduino)! Awesome! Thanks for making these. Can't wait to play.
-N8
"I built it because I didn't know I couldn't" |
|||
02-17-2016, 07:37 PM,
|
|||
|
|||
RE: ATmega & PIC Prototyping PCB
Hello All,
Attached is a great diagram I use to map the actual Atmega pin names to the Arduino pin name. The labels I put on the Proto-board are the actual Atmega port names (which are on this diagram)...if you're using the Arduino, you can of course address the ports / pins directly (which is faster than digitalWrite), or you can use the digitalWrite() and the Arduino pin designation. |
|||
02-18-2016, 10:00 AM,
|
|||
|
|||
RE: ATmega & PIC Prototyping PCB
Brendan, the "Simon says" game on your custom board was a hit last night! When life slows down for you, let's work on putting together a class on this.
-N8
"I built it because I didn't know I couldn't" |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)