Raspberry Pi LED Controller Build

[IdeaMakers]

As Dan likes to say, Build It, Own It, here's a photo of all the pieces parts that need to be soldered together.



In front is the Prototyping Pi Plate which mounts on top of the Raspberry Pi and will hold all the pieces when soldered together.

In back is the 16 Channel Servo Driver which breaks up the controls for the individual RGBs and does PWM. I could control 4 separate LED strings from the one board but fortunately for the neighbors we are only doing one. This board can also do motor / servo control and you can connect up to 16 PWM devices to just the single board.

And the little board is the luminosity sensor.

Time to polish up my soldering skills, John