Wax stamp - Printable Version +- Spokane Create! Forums (http://forum.spokanecreate.org) +-- Forum: Spokane Create! (http://forum.spokanecreate.org/forumdisplay.php?fid=1) +--- Forum: Projects (http://forum.spokanecreate.org/forumdisplay.php?fid=4) +--- Thread: Wax stamp (/showthread.php?tid=85) |
Wax stamp - Dan - 04-18-2013 Awhile ago I had an interest to build a monogram wax stamp. I drew it up with my initials and the hackaday logo quite some time ago, I never took the time to cut it so I played with it tonight to see roughly what it would look like. [video=youtube]http://youtu.be/9Cdo3E2k7f0[/video] I just took a scrap of aluminum I had and cut it, but I didn't have the right size cutter for the original design (1/32 end mill... tiny) I left it in the scrap metal, and melted some wax, and this is what I got: RE: Wax stamp - davidf - 04-19-2013 Is that the mill you put motors on? That's pretty cool. Now we need to come up with a logo and we can seal our letters with it. RE: Wax stamp - Dan - 04-19-2013 Yea, I guess I never did post anything about what it is. its a taig mill It is cnc controlled via EMC2 (linuxCNC) and Gecko stepper drivers. I will post some pics and other info about it later. If anybody wants anything cut on it, just let me know RE: Wax stamp - IdeaMakers - 04-19-2013 Did you cut that with a 1/32 or wanted to use a 1/32. Looks nice either way. I've just received some 60 degree V bits for engraving Al but haven't had a chance to use them yet. RE: Wax stamp - Dan - 04-19-2013 now that I go back and look at the toolpath I did design it for 1/32, and I did use a 1/32 end mill. so I think problem is that I need to change the size of the islands to make them large enough to stay intact RE: Wax stamp - Mawson - 05-03-2013 Cool stuff! Great to see we have CNC already! I've got a few projects in mind that will need quite a bit of machining on that scale. How precise is it? We (my family) has a bunch of wax seals around our place from years ago, I'd be interested in making a custom one for my slef, since I never got a seal I liked. We also did some stamp cutting back then too. |